DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
2-7
Specifications • 2
For envelope addressing purposes, the printer is compatible with any word
processor or database application that can print a mailing label.
The paper types listed below are approved for use with the printer. Please note
that the dimensional limits above apply in all cases, and that all media (enve-
lopes, postcards, flats, etc.) should be without windows.
• White Wove
• Bond paper
• Recycled paper
• Coated paper
• Card stock
• Brown kraft
• Manila
• Perforations
Refer to the table below for media size specifications.
Throughput
DA80F: 22,000 envelopes hour
DA95F: 30,000 envelope per hour
Based on:
• "Super Draft" mode print quality
• 3-line destination address
• 18 characters per line
• 12-point character size
• Time New Roman font
NOTE: Adding graphics and/or printing at a higher resolution (e.g., Draft, Let-
ter, Executive mode) will decrease throughput.
2.4 Print
Specifications
2.5 Material
Specifications
Media Sizes
DA80F DA95F
Min. width 5" (127 mm) 5" (127 mm)
Max. width 14" (355 mm) 14" (355 mm)
Min. height (length) 3.5" (89 mm) 3.5" (89 mm)
Max. height (length) 15.5" (393 mm) 15.5" (393 mm)
Min. thickness 0.003" (0.08 mm) 0.003" (0.08 mm)
Max. thickness 0.25" (6.3 mm) 0.50" (12.7 mm)
Input Feeder Capacity
DA80F/DA95F: 500 #10 or DL Envelopes
✍
TIP: Any network
the print data has to
flow through to reach
the printer may af-
fect (reduce) printer
throughput.
To Next Page
Loading...
