Pitney Bowes DA80F - Printer Top Cover

5-48 DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
5 • Removal and Replacement
DA95F (WF96) - Printer Parts Removal
5.28 Printer
Top Cover
1. Lift top plexiglass cover up to access shock support arm. Unfasten two
screws where support arm attaches to cover.
2. While holding cover, unfasten two screws at either end where cover at-
taches to chassis. Remove cover.
Shock Support Arm for Cover
Top Cover
Screws (Circled) Holding Top Cover to Chassis
Two Screws
Holding Shock
Support Arm