User Manual of WDAP-C7200AC/WDAP-W7200AC
-100-
5.6.3 SNMP
Choose menu “Management SNMP” to enable SNMP to allow the network management station to retrieve
statistics and status from the SNMP agent in the AP. Simple Network Management Protocol (SNMP) is a popular
network monitoring and management protocol, used to refer to a collection of specifications for network
management that includes the protocol itself.
Figure 5-83 SNMP
The page includes the following fields:
Object Description
Enable SNMP
It shows the statistic count of sent packets on the wireless LAN interface.
Name
An administratively-assigned name for this managed node.
Location
The physical location of this node.
Contact
The textual identification of the contact person for this managed node.
Read/Write Community
Enter the community name that allows Read/Write access to the AP's SNMP
information. The community name can be considered a group password. The
default setting is “private”.
Read-Only Community
Enter the community name that allows Read-Only access to the AP's SNMP
information. The community name can be considered a group password. The
default setting is “public”.
Trap Receiver IP
Address
Enter the IP address s of the SNMP trap receiver.
Apply Change
Click “Apply Change” to save and apply the settings.
Reset
Click “Reset” to reset the values to default.
To Next Page
Loading...
Need help?
General
