User Manual of WDAP-C7200AC/WDAP-W7200AC
-69-
Enable Universal
Repeater Mode
(Acting as AP and client
simultaneously)
Universal Repeater is a technology used to extend wireless coverage.
To enable Universal Repeater mode, check the box and enter the
SSID you want to broadcast in the field below. Then please click
“Security” in the submenu for the related settings of the AP you want
to connect with.
Multiple-SSID
Enabling multiple-SSID can broadcast multiple WLAN SSIDs using virtual interfaces. You can have different
encryption settings for each WLAN and you can restrict what they have access to.
Choose menu “WLAN1 (2.4GHz) → Basic Settings → Multiple AP” to configure the device as a general
wireless access point with multiple SSIDs.
Figure 5-51 2.4GHz Wireless Basic Settings – Multiple APs
The device supports up to four multiple Service Set Identifiers. You can go back to the Basic Settings page
to set the Primary SSID. The SSID’s factory default setting is Planet 2.4G VAP1~4 (Multiple-SSID 1~4).
The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless
network. When the information for the new SSID is finished, click Apply Changes to let your changes take
effect.
AP(Multi-SSID) Mode
Clients
Clients
SSID-1(5G)
SSID-2(2.4G)
Internet
WDAP-C7200AC
AP Mode
To Next Page
Loading...
Need help?
General
