User Manual of WDAP-C7200AC/WDAP-W7200AC
-56-
WPA2:
WPA2 is a high level encryption and is supported by most wireless devices
and operating systems.
WPA / WPA2 / WPA-Mixed:
WPA Mixed Mode allows the use of both WPA and WPA2 at the same time.
Enterprise (RADIUS)
When you select the authentication mode based on Enterprise (Radius
Server), please enter the IP Address, Port, and Password of the Radius
Server.
Authentication Mode
Personal (Pre-shared Key)
When you select the other authentication mode based on Personal
(Pre-shared Key), please enter at least 8 ASCII characters (Passphrase) or
64 Hexadecimal characters. All of the Cipher Suites support TKIP and AES.
802.1x Authentication
Enable 802.1x authentication function and then please enter the IP Address,
Port, and Password of the Radius Server.
5.4.5 Access Control
Choose menu “WLAN1 (5GHz) Access Control” to allow or deny the computer of specified MAC address to
connect with the WDAP-C7200AC/WDAP-W7200AC on this page. After the configuration, please click “Apply
Changes” to save the settings.
Figure 5-37 Wireless Access Control – 5GHz
The page includes the following fields:
Object Description
To Next Page
Loading...
Need help?
General
