User Manual of WDAP-C7200AC/WDAP-W7200AC
-15-
Step 4. Load the device into the mounting bracket, and make sure the device is mated with two fixed screws.
Then, rotate the device clockwise to lock it in position.
Figure 3-4 WDAP-C7200AC Installation Diagram 4
Step 5. Plug the other end of the Ethernet cable into the PoE switch.
※ IEEE 802.3at PoE switch is required.
Figure 3-5 WDAP-C7200AC Installation Diagram 4
To Next Page
Loading...
