Planet WDAP-C7200AC User Manual

User Manual of WDAP-C7200AC/WDAP-W7200AC
-87-
5.5.5 Access Control
Choose menu “WLAN2 (2.4GHz)  Access Control” to allow or deny the computer of specified MAC address
to connect with the WDAP-C7200AC/WDAP-W7200AC on this page. After the configuration, please click “Apply
Changes” to save the settings.
Figure 5-68 Wireless Access Control – 2.4GHz
The page includes the following fields:
Object Description
Wireless Access
Control Mode
You can choose to set the Allowed-List, Denied-List, or disable this function.
MAC Address
Enter the MAC address you want to allow or deny connection to the
WDAP-C7200AC/WDAP-W7200AC in the field.
Comment
You can make some comment on each MAC address on the list.
Current Access Control
List
You can select some MAC addresses and click “Delete Selected” to delete it.
 Wireless Access Control example:
To deny a PC at the MAC address of 00:30:4F:00:00:01 to connect to your wireless network, do as follows:
Step 1. Select “Deny” from MAC Address Filter drop-down menu.
Step 2. Enter 00:30:4F:00:00:01 in the MAC address box and click “Add”.

Planet WDAP-C7200AC Specifications

General

Brand	Planet
Model	WDAP-C7200AC
Category	Wireless Access Point
Language	English