Planet WDAP-C7200AC - Reload Settings

User Manual of WDAP-C7200AC/WDAP-W7200AC
-107-
Figure 5-89 Save/Reload Settings
The page includes the following fields:
Object Description
Save Settings to File Click “Save…” to back up the configuration of the
WDAP-C7200AC/WDAP-W7200AC and then save the “config.dat” in your
computer.
Load Settings from File
Select the configuration file of the WDAP-C7200AC/WDAP-W7200AC and
then click “Upload” to reload the configuration back into the
WDAP-C7200AC/WDAP-W7200AC.
Reset Settings to
Default
Click “Reset” to reset all settings of the
WDAP-C7200AC/WDAP-W7200AC to factory default.
Factory Default Settings:
User Name: admin
Password: admin
IP Address: 192.168.1.253
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP: Disabled
5GHz SSID: Planet AP 5G
2.4GHz SSID: Planet AP 2.4G
Wireless Security: None
To activate your settings, you need to reboot the wireless AP after you reset it.