User Manual of WDAP-C7200AC/WDAP-W7200AC
-34-
5.3 TCP/IP Settings
This page is used to configure the parameters for local area network which connects to the LAN port of your AP.
Here you may change the setting for IP address, subnet mask, DHCP, etc.
5.3.1 LAN Settings
On the LAN Settings page, you can configure the IP parameters of the LAN on the screen as shown below.
Figure 5-17 LAN Setting
The page includes the following fields:
Object Description
IP Address The default LAN IP address of the WDAP-C7200AC/WDAP-W7200AC
is 192.168.1.253. You can change it according to your request.
To Next Page
Loading...
