User Manual of WDAP-C7200AC/WDAP-W7200AC
-125-
Step 3. In the WDAP-C7200AC-2, go to “WLAN2 (2.4GHz) Basic Settings” to configure wireless mode to
“AP+WDS” and then configure the channel to a fixed one which must be the same as the root AP. Click
“Apply Changes” to take effect.
※ The root AP should be the same model (WDAP-C7200AC) in WDS mode; otherwise, the connection might
not be able to be established due to the incompatibility.
To Next Page
Loading...
