Planmeca ProMax - mAs Range Specifications; mGy Range Specifications; Linearity of Radiation Output; Cooling Period Information

TECHNICAL SPECIFICATIONS
56 Planmeca ProMax 3D Max with ProTouch
User’s Manual
• Ceph 1 - 16 mA ±10%
Anode current
(X-ray units with SW 3.0 or later):
• 3D 3D s / 3D Classic / 3D Plus / 3D Mid:
1 - 14 mA ±10%
3D Max: 1 - 12.5 mA ±10%
• Pan / SmartPan 1 - 16 mA ±10%
• Scanning ceph 1 - 16 mA ±10%
• Planmeca ProCeph 16 mA ±10%
mAs range
min. / max. as indicated ±(10% + 0.2 mAs)
mGy range
min. / max. as indicated ±40%
Linearity of radiation output
< 0.1
Cooling period
Automatically controlled
Exposure time:
• 3D 3D s:
Pulsed, effective 4.8 - 36 s as indicated ±10%
3D Classic / 3D Plus / 3D Mid:
Pulsed, effective 2.4 - 36 s as indicated ±10%
3D Max:
Pulsed, effective 3.6 - 24 s as indicated ±10%
• Pan 2D / 3D s / 3D Classic:
2.7 - 16 s as indicated ±10%
3D Plus / 3D Mid: 3.1 - 19 s as indicated ±10%
• SmartPan 3D s / 3D Classic:
3.3 - 19 s as indicated ±10%
3D Plus / 3D Mid: 3.7 - 23 s as indicated ±10%
• Scanning ceph / Normal 12 - 18.7 s as indicated ±10%
• Scanning ceph / High Speed 6.4 - 9.9 s as indicated ±10%
• Planmeca ProCeph 0.1 - 0.8 s as indicated ±10%
SID:
• 3D 3D s / 3D Classic: 527 mm (20.7 in.)
3D Plus / 3D Mid / 3D Max: 600 mm (23.6 in.)
• Pan 2D / 3D s / 3D Classic: 500 mm (19.7 in.)
3D Plus / 3D Mid: 573 mm (22.6 in.)
• Ceph 1700 mm (66.9 in.)
Magnification:
• 3D 3D s / 3D Classic: 1.57
3D Plus / 3D Mid: 1.38, 1.44 or 1.80
3D Max: 1.38, 1.41 or 1.80
• Pan 2D / 3D s / 3D Classic: 1.2 - 1.5
3D Plus / 3D Mid: 1.4 - 1.8