Plockmatic SR 85 - REP 2.1 Infeed module

Bookletmaker SR 85 February 2001PAGE
REMOVAL
1. Remove the front and rear cover according to REP 1.1.
2. Remove the two panels,shelf and the infeed assy according to REP1.3.
3. Remove the infeed cover according to REP 1.4
4. Disconnect the five connectors (1).
5. Remove the spring (2).
9. Lift out the Infeed module (4). Carefully so the side guides does not bend.
INSTALLATION
Installation is an exact reversed procedure of removal.
REP 2.1 Infeed module
2.1.1
4
5
6. Disconnect the length adjust strap (3).
7. Remove the two screws (5) on the front side.
8. Remove the two screws (5) on the rear side.
VIEW INSIDE INFEED COVER
1
1
1
23