Customize the Columns on the Lines Screen
When you add contacts or favorites to line keys on the Lines screen, the contacts display in columns. You
can control how many columns of line keys display on the Lines screen on your VVX 500/501 and
600/601 phone.
By default, the phone displays the maximum number of columns and line keys. The following are the
maximum line keys and columns that display on each phone:
• VVX 500/501: 3 columns with 12 line keys
• VVX 600/601: 4 columns with 16 line keys
Procedure
1. Go to Settings > Basic > Preferences > Idle Screen Settings.
2. Select Columns, enter the number of columns you want to display.
For VVX 500/501, enter a number between 1-3; For VVX 600/601, enter a number between 1-4.
3. Select Save.
Enable Transparent Line Keys
By default, your phone displays line keys with a background. If you have a background picture set, the
background is partially or fully covered depending on the number of line keys you have.
On VVX 500/501 and 600/601 phones, you can change line keys to have a transparent background that
enables you to fully see the background you set for your phone.
Procedure
1. Go to Settings > Basic > Preferences > Idle Screen Settings.
2. On the Idle Screen Settings screen, select Transparent Lines and then select Enabled.
The line keys are displayed without a background, as shown next.
Screen Savers
Another way to personalize your phone is to enable a screen saver that can either show default pictures
stored on your phone, the idle browser, or pictures stored on a USB flash drive.
Ask your system administrator if this feature is available on your phone.
Poly VVX Phone Settings
134
To Next Page
Loading...
