Poly VVX 300 Series - Set the Dial Tone; Set the Decibel Spike Limit; Set the Decibel Threshold Limit; Set the Hours on Phone Per Day

Set the Dial Tone
You can set the dial tone of the softphone to alert for an outgoing call.
Procedure
1. Do one of the following:
• Go to Settings > Basic > PLT Hub > Softphone.
• Go to PLT Hub > Softphone.
2. Select Dial Tone.
3. Select On to enable the dial tone and select Off to disable dial tone.
Set the Decibel Spike Limit
You can limit the decibel spike threshold on the headset to eliminate sudden loud and acoustic sounds.
Procedure
1. Do one of the following:
• Go to Settings > Basic > PLT Hub > Advanced.
• Go to PLT Hub > Advanced.
2. Select Anti-Startle.
3. Select one of the following:
• Off: Headset limits the sound level to 118 dBA.
• G616: Protects from acoustic shock and limits the sound levels to 102 dBA.
Set the Decibel Threshold Limit
You can set the headset with a noise exposure setting to limit how loud the sound levels can become. If
you disable this setting, the headset limits the sound level to 118 dBA.
Procedure
1. Do one of the following:
• Go to Settings > Basic > PLT Hub > Advanced.
• Go to PLT Hub > Advanced.
2. Select Noise Exposure.
3. Select one of the following:
• No Limiting
• Limited at 80 dBA
• Limited at 85 dBA
Set the Hours on Phone Per Day
You can set the headset with the number of hours on the phone per day to optimize the decibel limits.
Procedure
1. Do one of the following:
Poly VVX Phone Settings
146