Tip: You can quickly disconnect your Bluetooth device by turning off the device or turning off Bluetooth
on the phone. When you turn your device back on, it automatically reconnects to your phone.
Procedure
1. Go to Settings > Basic > Bluetooth Settings.
2. On the Manage BT Devices screen, select the connected Bluetooth device and select
Disconnect.
3. Select your device and select Remove .
The phone removes your device from the list. Your device is no longer paired or connected with
your phone.
Edit Your Phone's Bluetooth Device Name
You can change the Bluetooth device name for your VVX phone to identify your phone to other devices.
Bluetooth devices use the phone's default device name to identify the phone in the list of available
devices, which displays as Polycom <phone model name> on Bluetooth devices.
Procedure
1. Go to Settings > Basic > Bluetooth Settings.
2. Ensure that Bluetooth is On.
3. From the Bluetooth Settings screen, select Device Name.
4. In the Device Name text box, enter the name you want to give for the VVX.
5. Select Save.
Disable Bluetooth Device Discovery
After Bluetooth is turned on, the Bluetooth device is automatically placed in Discovery mode to be visible
to other Bluetooth-enabled devices.
You can choose to disable this feature to not allow your Bluetooth device to show as an available device
on other Bluetooth devices.
Procedure
1. Go to Settings > Basic > Bluetooth Settings.
2. Select Discoverable then select Off.
DTMF Dialing
After the phone is successfully connected to a smartphone, you can manage call controls for the paired
and connected smartphone, including entering DTMF tones.
During an active call, you can use the keys on the VVX phone to enter DTMF tones to respond to
computer-generated prompts during calls. For example, you can use the keys on the VVX phone to
respond to prompts during calls with customer service or technical support numbers.
Using Bluetooth Devices on VVX 600 Series Phones
152
To Next Page
Loading...
