The Bluetooth icon displays in the status bar. After the icon displays, you can pair and connect
your Bluetooth-enabled device.
3. Turn your Bluetooth device on and place the device in Discovery mode.
Refer to your Bluetooth device's documentation for information on how to place your device in
discovery mode.
4. Return to Bluetooth Settings and select Manage Devices.
5. Tap Scan to find your Bluetooth device.
6. Select your headset in the scanned list in the Manage Devices screen.
7. Tap Pair in the Available Devices screen to begin the pairing process.
8. Select Connect to connect the paired device.
The Bluetooth Headset icon along with a message that the device is connected displays in the
Manage Devices screen and in the status bar of the phone.
After you connect a Bluetooth device to your phone, the phone automatically connects to the last
connected Bluetooth device after a reboot or restart.
Managing Calls with Your Bluetooth Headset
When your Bluetooth headset is turned on, paired, and connected with your phone, you can perform the
following tasks:
• Use the headset to handle calls, including muting and adjusting the call volume.
• Initiate and end calls on your headset by pressing the headset key , or using a control on the
headset.
• Switch to handset or speakerphone mode during a headset call by picking up the handset or
pressing the Speakerphone key .
When you turn the headset off, the headset is no longer connected but remains paired to your phone.
When you turn the headset back on, the headset is reconnected.
Pairing a Smartphone to Your Phone
When your system administrator has enabled Bluetooth on your phone, you can pair your phone to a
Bluetooth-enabled smartphone.
After you pair a smartphone to your phone, you can use your phone to handle call controls for the
smartphone, including muting the microphone and adjusting call volume.
Enable Bluetooth and Connect a Smartphone
You can enable Bluetooth and connect a smartphone to your phone and select a smartphone to connect
with in the list of available devices.
You can pair up to five smartphones with your phone; however, you can connect only one smartphone at
a time.
Procedure
1. Go to Settings > Basic > Bluetooth Settings.
2. Select Bluetooth then select On.
Using Bluetooth Devices on VVX 600 Series Phones
150
To Next Page
Loading...
