Poly VVX 300 Series - Switch Phone Screens

Figure 9: Active Call screen on VVX 500 series phones
Procedure
» Do one of the following:
• Place a call.
• When you're in a call, press the Home key or select the Calls soft key.
• In the status bar, select Return to Calls.
• Swipe the screen from right to left.
Switch Phone Screens
You can switch the screens that display on your phone. Some screens are only accessible if your phone
is idle or has one or more calls in progress.
You can see any phone screen by pressing the Home key or swiping your finger from right to left on
the touchscreen.
You can access these screens in the following scenarios:
• If your phone isn’t in a call, you can access the Home and Lines screens.
• If your phone has an active call, you can access all screens.
• If your phone has one active call only, you can access the Home, Lines, and Active Call screens.
• If your phone has multiple calls (including held calls), you can access the Home, Lines, and Calls
screens.
• If your phone is off-hook but not in a call, you can access Home and Lines screens.
Procedure
» Do one of the following:
• On the Home screen, press the Home key to display the Lines, Calls, or Active Call
screens.
Note: The Calls and Active Call screens display only when you have an active or held call
on your phone.
• To display the Home screen from any other screen, press the Home key.
• Press the Lines softkey to access the Lines screen from the Calls or New Call screens.
• Press the Calls softkey to access the Calls screen from the Lines screen.
• On VVX 101/201 phones, press the C > L soft key to display the Lines screen from the Calls
screen.
• On VVX 101/201 phones, press the L > C soft key to display the Calls screen from the Lines
screen.
Getting Started
26