The phone plays a tone and the contact’s phone answers the call automatically.
4. After your contact answers the call, speak your message and select End Call.
Place an Intercom Call During a Call
You can place an intercom call to another contact during an active call.
Procedure
1. Select Hold > Intercom.
The active call goes on hold and the dialpad displays.
2. Enter a number or select a contact.
3. Select Dial.
The phone plays a tone and the contact’s phone answers the call automatically.
4. After your contact answers the call, speak your message and select End Call.
5. Select Resume.
Place a Call from an Expansion Module
You can place a call using the line keys on expansion modules connected to supported VVX.
Procedure
» Do one of the following:
• Press a line key corresponding to an available line and dial the number.
• Press the line key of the assigned favorite you want to call.
The call is placed and is displayed on your phone's screen.
Place a Call with a Hidden Number
When your phone is registered with the BroadSoft BroadWorks server, you can choose to hide your
phone number when you place a call.
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Do one of the following:
On VVX 1500 business media phones, go to Menu > Features > UC-One Call Settings.
2. If you have more than one line registered, select a line.
3. Select Line ID Delivery Blocking and select Enabled.
Your number does not display when you place calls to contacts.
Redial a Number
Your phone automatically keeps a record of all calls placed. You can recall the last contact you called
using Redial, if enabled by your system administrator.
Procedure
» Select Redial.
Audio Calls
46
To Next Page
Loading...
