• Go to New Call > Directory.
• Go to Place a Call > Directory.
2. Choose a directory.
3. From your directory, select or search for a contact.
4. Select the contact's phone number.
On VVX 500/501 and 600/601 phones, the phone automatically places the call.
5. If the call is not placed automatically, select Dial.
Call a Contact from the Directory Search Screen
You can search for and call contacts from the Search screen in your directory on your phone.
Procedure
1. Go to Directories and select a directory.
2. Select Search, enter your contact's first or last name, and select Search.
3. Select your contact.
4. In the Contact Information screen, select the contact's number, and select Dial.
Place a Call from a Locked Phone
When the phone is locked, you can place outgoing calls only to emergency numbers, such as 911 and
authorized numbers that your system administrator can set up. You cannot call any other numbers from a
locked phone.
Procedure
1. Select New Call.
2. From the Place an Authorized Call screen, choose a number and select Dial.
Placing Intercom Calls
Like a normal call, the intercom feature enables you to place a call to a contact.
An intercom call differs from a normal call in that the call recipient’s phone answers automatically when
not in an active call. Check with your system administrator to find out if this feature is available on your
phone.
If the call recipient has an active call, the recipient can choose to answer the intercom call. Otherwise, the
phone answers the intercom call automatically after their active call ends.
Place an Intercom Call
You can place an intercom call from your phone to quickly relay a message to a contact.
Tip: Your system administrator can set up your phone to automatically call a specific contact when you
select Intercom. If your phone is set up this way, select Intercom and wait for your contact to
answer before speaking your message.
Procedure
1. Select Intercom.
2. Enter a number or select a contact.
3. Select Dial.
Audio Calls
45
To Next Page
Loading...
