The phone scans for wireless networks and lists any that are available. If the phone does not
automatically scan, select Scan to manually initiate a Wi-Fi network scan.
Note: The administrator can configure the regulatory domain for your location and radio frequency
bands on which the wireless network operates. If not configured, the phone uses the Global
regulatory domain and 2.4 GHz and 5 GHz default radio bands.
Connect to a Secured Wireless Network
You can select a PSK or an enterprise-based security option to connect your phone to a secured wireless
network.
Procedure
1. Go to Settings > Basic.
2. Select Wi-Fi.
3. Do one of the following:
• For a WPA(2)-PSK network, enter the Password.
• For a WPA2-enterprise network, enter User ID and Password.
Note: Your administrator sets the appropriate EAP method to connect to an enterprise-
based network.
4. Select Connect.
The Wi-Fi connection status displays on the Menu and Home screens.
Disconnect from a Wireless Network
To change wireless connections or switch to an Ethernet connection, disconnect from the current wireless
network.
Procedure
1. Go to Menu > Settings > Device Settings.
2. Select Wi-Fi.
3. Select the connected wireless network SSID from the list.
4. Select Disconnect.
Remove a Wireless Network
Remove any saved wireless network that is no longer necessary.
Procedure
1. Select the connected wireless network SSID from the list.
2. Select Forget.
Connecting to a Wireless Network
154
To Next Page
Loading...
