Disable Do Not Disturb
When you’re ready to receive calls, disable DND.
Tip: To quickly disable DND on VVX 600/601 phones, tap in the status bar.
Procedure
» Select DND.
On VVX 1500 phones, press the DND key.
Reject Anonymous Calls
When your phone is registered with a BroadWorks server and you are signed into the phone with your
BroadSoft UC-One credentials, you can use the Anonymous Call Reject (ACR) feature to automatically
reject anonymous calls to your line from callers who have restricted their caller identification.
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Do one of the following:
• Select UC-One on the Home screen.
• Go to Settings > Features > UC-One Call Settings.
2. If your phone has multiple lines, select a phone line.
3. Select Anonymous Call Reject.
4. On the Anonymous Call Reject screen, select Enabled.
When an anonymous call is placed to your phone number, the call is automatically rejected and
the caller hears a message stating that you do not accept calls from unidentified numbers. Your
phone does not ring, and you are not notified of an attempted call.
Redirecting Incoming Calls
Forward one or all incoming calls to a specific contact or divert calls from a specific contact to another
contact.
Forwarding Incoming Calls to a Contact
You can forward incoming calls to one of your contacts.
Note: When you sign in to a host phone as a guest, you can only forward calls if your administrator
enables the server-based Call Forwarding feature. Otherwise, you can’t forward calls to a
contact from the host phone. Contact your system administrator for help with enabling this
feature.
Audio Calls
62
To Next Page
Loading...
