However, when you add a new contact to your contact directory, you can specify which protocol the
phone uses for calls placed that contact. Doing so ensures that your phone automatically uses the correct
protocol when you dial the contact.
Procedure
1. Tap New Call.
2. Select Use Auto to enable your phone to automatically select the protocol to use.
Answering Audio Calls
When you receive an incoming call on your phone, you can choose to answer the call in a number of
different ways.
Answer an Incoming Call
When you receive an incoming call, the phone rings and the Incoming Call screen displays. On the
Incoming Call screen, you can choose to answer or reject the incoming call.
Note: Your system administrator can enable the screen to flash bright orange when you have an
incoming call. The screen continues to flash until the Home or Calls screen displays the incoming
call. For more information about this feature, contact your system administrator.
Procedure
» Do one of the following:
• Pick up the handset.
• Press the Speakerphone key or select Answer.
• Press the Headset key .
After you answer the incoming call, the call becomes active.
Answer a Call from the Calls Screen
When you don't answer an incoming call within 10 seconds, the Incoming Call screen disappears and the
Calls screen displays.
Procedure
» Select the incoming call, and select Answer.
Answer a Call When in a Call
When you’re in an active call and an incoming call arrives on the same or a different line, a call waiting
tone beeps and the Incoming Call screen displays.
If you don't answer the call within 10 seconds, the Incoming Call screen disappears, and the Calls
screen displays.
Procedure
» Select Answer.
This places the active call on hold, and the incoming call becomes active.
Audio Calls
48
To Next Page
Loading...
