The Bluetooth icon displays in the status bar. After the icon displays, you can pair and connect
your Bluetooth-enabled device.
3. Turn your Bluetooth device on and place the device in Discovery mode.
Refer to your Bluetooth device's documentation for information on how to place your device in
discovery mode.
4. Return to Bluetooth Settings and select Manage Devices.
5. Tap Scan to find your Bluetooth device.
6. Select your smartphone in the scanned list in the Manage Devices screen.
7. Tap Pair in the Available Devices screen to begin the pairing process.
A pairing request with a pairing code displays on your phone and the smartphone.
8. Accept the pairing request on both your phone and smartphone.
After the smartphone pairs with the phone, the smartphone displays along with its icon on the
Manage Devices screen.
9. Select Connect to connect the paired device.
After you connect the smartphone, the Bluetooth smartphone icon along with a message that
the device is connected displays in the Manage Devices screen and in the status bar of the VVX
600 or VVX 601.
After you connect a Bluetooth device to your phone, the phone automatically connects to the last
connected Bluetooth device after a reboot or restart.
Managing Calls with Your Smartphone
Note: While you can answer, reject, and end smartphone calls using your VVX phone, you can’t place
smartphone calls from your VVX phone.
When you pair and connect your smartphone with your VVX phone, you can perform the following tasks:
• Use the VVX to handle calls, including muting the microphone and adjusting the call volume.
Volume control isn’t specific only to the active calls but to any audio played on the VVX phone.
• Answer an incoming call.
• Reject an incoming call.
• End an active call from your phone or a connected smartphone.
Note: If you press the volume keys to silence your ringer while receiving an incoming call on your
iPhone paired with a VVX 600/601 phone over Bluetooth, the phone rejects the call.
Disconnect and Remove Your Bluetooth Device
Disconnect your Bluetooth device from your phone and still keep it paired. When you disconnect a
Bluetooth device, it remains paired so that you can reconnect it to your phone.
Disconnect and remove your Bluetooth device from your phone. To reconnect your phone to your
Bluetooth device, scan for, add, and reconnect with the device from your phone.
Using Bluetooth Devices on VVX 600 Series Phones
151
To Next Page
Loading...
