The following are three types of privacy codes that you can use to enable and disable privacy on a shared
line:
• Privacy Access (PRV) code—Enables privacy for an active call on a public line.
• Privacy Release Activation (PRLA) code—Disables privacy for an active call on a private shared
line.
• Privacy Release Cancel (PRLC) code—Re-enables privacy for an active call on a private shared
line.
When a shared line is configured as private or when privacy is enabled on an active call, bridging is
disabled and other MADN members cannot barge in on an active call on the shared line.
Enable Privacy
After you enable privacy for an active call on a public shared line, you cannot disable privacy for the call.
You can allow other MADN members to join the active call by transferring the call or initiating a
conference call.
Procedure
» During an active call, do one of the following:
• Select Transfer and dial the PRV code given to you by your administrator
For example, dial *91.
• Select the Priv soft key, if enabled.
A confirmation tone plays and the call is resumed automatically.
Disable Privacy Temporarily
You can temporarily disable privacy for an active call on a private shared line to allow other MADN
members to join the call.
Procedure
1. During an active call, press the PRLA soft key or select Hold and dial the PRLA code given to you
by your administrator.
For example, dial *921.
A confirmation tone plays, and the call is resumed automatically. Privacy is disabled for the call
and any member can barge in on the call.
2. After other MADN members have joined the call, press the PRLA soft key or select Hold and dial
the PRLC code given to you by your administrator.
For example, dial *922.
A confirmation tone plays, and the call is resumed automatically.
Enable Privacy on a Bridge Call
You can enable privacy on a bridge call to prevent additional MADN members from barging in to the call.
Procedure
» During a bridge call, select Transfer and dial the PRV code or select the Privacy soft key, if
enabled.
A confirmation tone plays when privacy is enabled and the call is resumed automatically. The
bridge call is now private and additional MADN members are not allowed to join the call.
Shared Lines
72
To Next Page
Loading...
