Poly VVX 300 Series - Page 89

Note: Depending on the phone or system that is sending video, black bars might appear on the top,
bottom, or sides of the video. Black bars appear when aspect ratio of the video received doesn’t
match the display area on your phone. If the received video matches your phone's display area,
the received video fills the screen. If black bars display, you can remove them by selecting
cropped video screen mode.
Change How PIP Video Displays
Update the PIP display for viewing in full screen mode, viewing the far-side, or viewing your video on the
full screen.
You can change the following PIP settings:
• Local Camera View (Full Screen)—Enables or disables the PIP from displaying when you view
video on the full screen. The default setting is Enabled.
• Local Camera View Mode (Full Screen)—Sets whether you want the PIP to display over or next to
full-screen video. The default setting is Side-by-Side. You can choose to enable one of these
settings:
◦ Side-by-Side—Displays the PIP next to, rather than over, full-screen video.
◦ PIP—Displays the PIP over full-screen video.
Procedure
1. Go to Settings > Basic > Video.
2. Select Local Camera View then select and adjust the PIP settings.
3. Select Save.
Adjust the Video Display
You can adjust video settings to control the appearance of video you receive from the far end.
Depending on how the far end video's aspect ratio differs from your display's aspect ratio, you can adjust
how the video image displays on your screen.
Procedure
1. Go to Settings > Basic > Video.
2. Select Video Screen Mode and choose one of the following video screen settings to make
adjustments:
• Normal: The video image retains the aspect ratio sent from the far end. Black bars appear
wherever the aspect ratio of the received video doesn’t match your screen.
• Full: The system fits the video to the screen. Stretched portions of the video may appear
distorted.
• Crop: The system enlarges and crops the video to fit your screen without stretching the
video.
You can apply the following settings for video that displays on the full screen and in the Active
Call screen:
• Video Screen Mode (Window): Adjusts the video image that displays in the Active Call
screen. The default setting is Normal.
• Video Screen Mode (Full Screen): Adjusts the video image that displays on the full screen.
The default setting is Normal.
Video Calls on Poly VVX
88