Polycom Business VoiceEdge - Be Anywhere Service and Mobile Usage

Quick Start 11
To use Speed Dial 8:
1. Lift the receiver and listen for the dial tone.
2. Press the digit (2 through 9) that represents the number you wish to call, then press
.
Note: Speed Dial can also be used on the Telephony Toolbar.
Speed Dial 100
To set up Speed Dial 100 from your phone:
1. Lift the receiver and listen for the dial tone.
2. Press
and listen for the stutter dial tone.
3. Enter any two digits through 99.
4. Dial the phone number you would like the digits to represent. (Remember to include the area code and any
other numbers necessary to place the call).
5. Listen for the voice prompt confirmation.
6. To add the next number, repeat steps 2 through 5.
To set up Speed Dial 100 from your computer:
1. From the Outgoing Calls Page, click “Speed Dial 100”.
2. Click “Add”. Your Speed Dial 100 Management Page appears.
3. Select a two-digit Speed Dial code.
4. Type a name or description for the Speed Dial number in the Description text box.
5. Type the phone number and the person’s name you are assigning to your Speed Dial code.
6. Click “OK”.
To use Speed Dial 100:
1. Lift the receiver and listen for the dial tone.
2. Press
and then dial the two digits that represent the number you wish to call.
Note: Speed Dial can also be used on the Telephony Toolbar.
Be Anywhere
The Be Anywhere service allows you (as a Unified Communications seat user) to make and receive calls from
any device at any location with only one phone number. Be Anywhere lets you make and receive calls from
colleagues, prospects and customers on any phone using your office number.
Receiving Business Calls on Your Mobile
You can receive business calls on your mobile phone by adding your mobile number to the Be Anywhere
Locations List. In addition, you can also receive calls on another phone number (it does not have to be your
mobile number).
To add your mobile number to the Be Anywhere Locations List:
1. Click the “Services” button on the Telephony Toolbar.
2. Select “Be Anywhere”.
3. Click “Add”. Enter your mobile phone number and a description.
4. Ensure Enable is checked.
5. Select “Apply”.