What to do if I observe diminution of the flow in Polymetron 9210 Measuring Instruments?
If you observe a diminution of the flow in your Polymetron Measuring Instruments, verify and adjust the flow (10 L/h), and change the sample tube if it is clogged.
What to do if the concentration of the standard solution is wrong in Polymetron 9210 Measuring Instruments?
If the concentration of the standard solution is wrong in your Polymetron Measuring Instruments, prepare a new standard solution.
What to do if there is a wrong proportion of reagent in Polymetron Measuring Instruments?
If there is a wrong proportion of reagent in your Polymetron Measuring Instruments, check the pumps.
What to do if the Polymetron 9210 Measuring Instruments reagent tubes are connected in a wrong order?
If the reagent tubes are connected in the wrong order in your Polymetron Measuring Instruments, verify the flow diagram.
What to do if the Polymetron 9210 reagent canisters are connected in the wrong order?
If the reagent canisters are connected in the wrong order in your Polymetron Measuring Instruments, verify the flow of the circuit from the MAINTENANCE / PUMPS-OTHERS menu.
What to do if there is bacterial development in reagent R3 (greenish deposit) in Polymetron 9210?
If you notice bacterial development in reagent R3 (greenish deposit) in your Polymetron Measuring Instruments, add 40 ml of sodium benzoate at 1 g/L.
How to fix a pump that is irregular in Polymetron 9210 Measuring Instruments?
If the pump in your Polymetron Measuring Instruments is irregular, it might be because the analyzer was stopped without cleaning the tubes. Try flushing the pump with clean water using a syringe. If the problem persists, consider changing the pump.
What to do if I see a wrong or irregular measurement on my Polymetron Measuring Instruments?
If you observe a wrong or irregular measurement on your Polymetron Measuring Instruments, verify the photometer in MAINTENANCE / PHOTOMETER TEST.
Steps for initial inspection, site preparation, and a complete installation checklist.
Instructions for physically mounting the analyzer and installing the canister holder.
Procedures for connecting essential lines: sample, drain, mains power, and communications.
Detailed steps for preparing reagents and initiating the analyzer startup sequence.
Guide to data input, function keys, and navigating measurement display screens.
Accessing and understanding the analyzer's main menu structure and options.
Setting measurement parameters, modes, and accessing historical data.
Configuring alarm settings and defining analog output parameters.
Overview of calibration options, types (primary, manual, auto), and programming settings.
Procedures for performing calibrations and analyzing calibration results and history.
Guide to diagnosing and resolving typical analyzer issues and error messages.
General| Brand | Polymetron |
|---|---|
| Model | 9210 |
| Category | Measuring Instruments |
| Language | English |
To Next Page