Powell BriteSpot Plus - Table B System Specifications

Powered by Safety
®
8
Equipment Description
01.4IB.48041
BriteSpot® Plus
Table B System Specifications
Characteristic Minimum Typical Maximum Units Comments
BriteSpot®
Number of Sensor Channels
BSPL.09C1P1E0X0 9 Channels
BSPL.18C1P1E0X0 18 Channels
Resolution 1 C/F
Accuracy ±2 (±3) C (F)
Measurement Range -40 (-40) 160 (320) C (F)
Calibration Not required, calibrated at factory.
Date Refresh Time: 3 sec
General
Onboard Data Storage 8 GB 16M records
Interface 4 buttons, 4.3” LCD display 480 x 272
Real Time Clock and Calendar RTCC, 21 days backup, no daylight savings
Mechanical
Dimensions 129.1 x 116.2 x 103.2 (5.08 x 4.57 x 4.06) mm (in)
Enclosure Material Molded ABS/PC & glass lled nylon - UL94V0
Mounting ¼ DIN panel mount (for details see Appendix A)
COM1 (for wiring details see Appendix B)
Communication Protocols MODBUS RTU, MODBUS TCP, HTTP
Auxiliary Output Voltage 12 Vdc
Auxiliary Output Current 350 mA
Note: Auxiliary output power is for Powell devices only.
PWR1 N/A Power Requirements (for wiring details see Appendix C)
Rated Supply Voltage
110 240 Vac 50/60 Hz
110 250 Vdc
Max/Min Supply Voltage
85 264 Vac 50/60 Hz
85 300 Vdc
Power 7 W
Output Relay (O.R.) Max Voltage 277 (125) Vac (Vdc)
O.R. Max Switching Current N/A DC
5 A @30 Vdc
0.4 A @125 Vdc
O.R. Max Switching Current N/A AC
5 A @250 Vac
2.5 A @277 Vac
O.R. Contact to Contact Isolation 750 Vac
O.R. Contact to Coil Isolation 3000 Vac