Power Electronics SD700 Series - Addressing Modes; Broadcast Addressing Mode

SD700
POWER ELECTRONICS
64
MODBUS COMMUNICATION
5.3. Remote Control Functions
HOST START CONTROL
Screen
-
Range
0 – 1
Modbus address
40562
Modbus range
0 to 1
Read / Write
YES
Description It allows giving the start command to the equipment through communications network.
HOST STOP CONTROL
Screen
-
Range
0 – 1
Modbus address
40563
Modbus range
0 to 1
Read / Write
YES
Description It allows giving the stop command to the equipment through communications network.
HOST RESET CONTROL
Screen
-
Range
0 – 1
Modbus address
40564
Modbus range
0 to 1
Read / Write
YES
Description It allows giving the reset command to the equipment through communications network.
HOST TRIP CONTROL
Screen
-
Range
0 – 1
Modbus address
40565
Modbus range
0 to 1
Read / Write
YES
Description It allows the equipment to generate a fault through communications network.
HOST COMMS CONTROL
Screen
-
Range
-20480 to +20480
Modbus address
40128
Modbus range
-20480 to +20480
Read / Write
YES
Description It allows the assignment of the speed reference through communications network.