Fig. 31: Setup menu
Fig. 32: Setup options 1/3
Password «Setup» Activation of access for the SETUP menu
Password «Set‐
tings»
Activation of access for the SETTINGS
menu
Lock the «Settings»
level with the
«Setup» code
Use SETUP password also for SETTINGS
Reset all cycles after
power failure greater
than
Stop and cancel all peripheral cycle (Bleed,
Biocide A, Biocide B, Inhibitor and disper‐
sant), if the controller is power off for a
duration longer than the defined value.
Reset all cycles after
controller stop
greater than
Stop and cancel all peripheral cycle (Bleed,
Biocide A, Biocide B, Inhibitor and disper‐
sant), if the controller is in OFF mode for a
duration longer than the defined value.
General Menu
35
To Next Page
Loading...
