Fig. 33: Setup options 2/3
Enable base load
setting for dosing
If activated, this option allows manual
adjustment of base load.
Enable the setting of
the activation time
max. dosing
If activated, this option allows manual
adjustment of maximum dosing time.
Enable the alarm
threshold hysteresis
setting
If activated, this option allows manual
adjustment of alarm hysteresis limits.
Enable manual set‐
ting for stop dosing
on alarm
If activated, this option allows manual acti‐
vation of stop dosing on alarm.
Fig. 34: Setup options 3/3
General Menu
36
To Next Page
Loading...
