Chapter 5: Configuration
Changing A Destination
200
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
5.11.3.3 Changing A Destination
To change an existing trap destination:
• Highlight the destination you want to alter in the Trap Destination tab, and
then choose the Change button.
A dialog box like the one displayed when you add a destination is displayed.
Figure 5.94 Changing A Destination
• Make the changes to the destination, and press <ENTER> to save
the changes.
5.11.3.4 Removing A Trap Destination
To remove a trap destination:
•In the Trap Destination tab, highlight the destination you want to delete.
• Choose the Remove button.
A Delete Confirmation screen is displayed.
• To remove a destination, choose the Yes button, or
If you decide not to remove the destination, choose the No button.
To Next Page
