Psion Teklogix 7535 - Working with Sessions; Establishing a New Session; Listing Sessions and Moving to Other Sessions; Closing a Session

Psion Teklogix 7535/7530 Hand-Held Computer User Manual 239
Chapter 6: Tekterm Application
Working With Sessions
6.7.5 Working With Sessions
Important: Use only lowercase letters when entering commands
at the “TCP >” prompt.
6.7.5.1 Establishing A New Session
• Press <CTRL>, and type a lowercase a.
At the TCP> prompt:
• Type tel in lowercase letters followed by the Host Name or IP address.
• Press <ENTER>.
• Log in as usual to begin working with the new session.
6.7.5.2 Listing Sessions And Moving To Other Sessions
To list the current sessions:
• Press <CTRL>, and type a lowercase a.
At the TCP> prompt:
• Type sess in lowercase letters, and press <ENTER>.
To move to another session:
• At the TCP> prompt, type sess in lowercase letters followed by the session
number to which you want to move.
e.g., Type sess 2 to move to session 2.
• Press <ENTER>.
6.7.5.3 Closing A Session
To close a session:
• Press <CTRL>, and type a lowercase a.
• At the TCP> prompt, type cl in lowercase letters followed by the session
number you want to close.
e.g., Type cl 2 to close session 2.
• Press <ENTER>.