Psion Teklogix 7535/7530 Hand-Held Computer User Manual 305
Chapter 6: Tekterm Application
Emulation
FKEY0-7, FKEY8-15, FKEY16-23, FKEY24-31 And FKEY32-39
The sub-menus attached to these parameters allow you to map the 7535/7530
function keys.
5250/Telnet Emulation
WEC (Write Error Code)
This parameter determines the type of WEC used. If set to “advisory”, a TESS
advisory message is generated when the host sends a WEC command to the
7535/7530. Otherwise, if set to “screen text”, the hand-held locks the keyboard and
displays the error message contained in the WEC command on the screen at the line
specified by the host. In this case, the 7535/7530 must be unlocked manually using
the function key mapped to RESET.
FKEY0 ENTER
FKEY1 F1
FKEY2 F2
FKEY3 F3
FKEY4 F4
FKEY5 F5
FKEY6 F6
FKEY7 F7
06
FKEY0-7
WEC Advisory see text
Remap Underline to None see text
Intl EBCDIC N Y/N
Nulls in Fields Y Y/N
Term Type IBM-5251-11 see text
Virtual Dev Enable N Y/N
Virtual Dev Prefix see text
Features » see text
FKEY0-7 » see text
FKEY8-15 » see text
FKEY16-23 » see text
FKEY24-31 » see text
FKEY32-39 » see text
Emulation
Range
05
To Next Page
Loading...
