Chapter 3: Getting To Know Your 7535/7530
Internal Scanners
54
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
However, external decoded scanners must be configured by scanning special configura-
tion bar codes. In these cases, the scanner manufacturer provides programming
manuals for configuration purposes.
• For Symbol decoded scanners, refer to the appropriate programming guide:
• P300.
• LS3408
• For Symbol non-decoded scanners, refer to the LS3200 Programming Guide.
• For Power Scan (PSC) decoded and non-decoded scanners, refer to the
Powerscan Programing Guide (PSC).
Scanner types include:
• Advanced Long Range – reads very large 1D bar codes (60 mil+) at very
long distances (up to 14m).
• Long Range – reads large 1D bar codes (55 mil) at long distances
(up to 3m).
• Wide Angle – reads large (or long) 1D bar codes (55 mil) at short distances
• High Performance – reads regular bar codes (5 - 55 mil) at medium dis-
tances (up to 1m).
• Short Range (SE923) – reads regular bar codes at short distances. This
scanner is included with an RFID reader in the combo RFID/laser option.
• RFID – is a short-range device that can read RFID tags within 1 cm. of the
hand-held scanner window. It supports the Sirit 13.56MHz RFID
reader/writer module and the Sirit 13.56MHz combo RFID reader/writer
laser bar code scanner module. These modules read the following RFID
tags: Phillips I-Code, Texas Instruments Tag-It, ISO-15693, Microchip
MCRF350 series, Inside Technologies PicoTag.
The bar code scanner reads the following bar codes: UPC/EAN, Code 128,
Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar and MSI Plessey.
• Fuzzy Logic – reads damaged or low contrast regular 1D bar codes (5 -
55mil) at medium distances (up to 1m).
• PDF Raster Laser – reads 2D PDF bar codes or regular bar codes at short to
medium distances.
• 2D Imager - reads regular 1D and all 2D bar codes at short to medium distances.
To Next Page
Loading...
