BIOS ADVANCED SCREEN
3-22
Super I/O Configuration Screen
The Serial Ports screen provides fields to configure the Serial
Port [COM Port].
To access this screen from the Main screen, select Advanced |
Super IO Configuration.
Figure 3-15. Super I/O Configuration Screen
Table 3-16: USB Configuration Fields
S
ETUP ITEM OPTIONS HELP TEXT COMMENTS
USB Devices:
Information only.
Display all of the
USB devices
attached.
Legacy USB
Support
[Enabled]
[Disabled]
[Auto]
Enables Legacy
USB support.
AUTO option
disables legacy
support if no USB
devices are
connected,
DISABLE option
will keep USB
devices available
only for EFI
applications.
Mass Storage
Devices:
[Auto]
[Floppy]
[Forced FDD]
[Hard Disk]
[CD-ROM]
Mass storage
device emulation
type. 'AUTO'
enumerates
devices
according to their
media format.
Optical drives are
emulated as
'CDROM', drives
with no media will
be emulated
according to a
drive type.
Information only.
Display only
when the type of
the USB devices
attached.
Version 2.14.1219 - Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Ma
To Next Page
Loading...
Need help?
General