CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-53
11.In the New SSK Key field, click Browse and select the
SSH key file.
12.Click Add to save the new user and return to the users
list.
13.Click Cancel to cancel the modification and return to the
users list.
Modify an existing user:
14.Select an existing user from the list and click Modify
User. This opens the Add User screen as shown in the
screenshot below.
Figure 4-42. Modify User Page
15.Edit the required fields.
16.To change the password, enable the Change Password
option.
17.After editing the changes, click Modify to return to the
users list page.
Delete an existing User
18.To delete an existing user, select the user from the list
and click Delete User.
Virtual Media
In MegaRAC GUI, this page to configure Virtual Media device
settings. If you change the configuration of the virtual media in
this page, it shows the appropriate device in the JViewer Vme-
dia dialog. For example, if you select two floppy devices in Con-
figure Virtual Media page, then in JViewer > Vmedia, you can
view two floppy device panel.
There is a list of reserved users which cannot be added / modified
as BMC users. Please Refer “MEGARAC SP-X Platform Porting
Guide” section “Changing the Configurations in PMC File-> User
Configurations in PMC File” for the list of reserved users.
To Next Page
Loading...