QUANTA STRATOS S210 Series S210-X22RQ - Processor Heat Sinks

INSTALLING HARDWARE PROCESSOR HEAT SINKS
2-12
2.6 Processor Heat Sinks
Removing a Heat Sink
Figure 2-18. Removing the Heat Sink
1. Remove the top cover. See Removing the Top Cover on
page 2-8.
2. Loosen the four (4) captive screws of the heat sink in
sequence.
3. Remove the heat sink.
WARNING!
The heatsink remains hot after the system has been powered
down. Allow sufficient time to cool before handling system
components.
!
AIR FLOW