QUANTA STRATOS S210 Series S210-X22RQ - Snmp

CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-45
Procedure:
1. Select the LAN Channel Number from the dropdown list.
2. Enter the Sender Address in the specified field.
3. Enter the Machine Name in the specified field.
4. In Primary SMTP Server, enter the Server Address in
the specified field.
5. Enable the check box SMTP Server requires Authenti-
cation if you want to authenticate SMTP Server.
6. Enter your User name and Password in the respective
fields.
7. In Secondary SMTP Server, enter the Server Address in
the specific field.
8. Enable the check box SMTP Server requires Authenti-
cation if you want to authenticate SMTP Server.
9. Enter your User name and Password in the respective
fields.
10.Click Save to save the entered details.
11.Click Reset to update the entered details.
SNMP
Simple Network Management Protocol (SNMP) is an "Inter-
net-standard protocol for managing devices on IP networks."
Using MegaRAC GUI, you can configure the SNMP settings of
the device.
BMC alert could issue by SNMP trap.
Username
The username to access SMTP Accounts.
Note:
 User Name can be of length 4 to 64 alpha-
numeric characters.
 It must start with an alphabet.
 Special characters ','(comma), ':'(colon),
';'(semicolon), ' '(space) and '\'(backslash) are
not allowed.
Password
The password for the SMTP User Account.
Note:
 Password must be at least 4 characters long.
 White space is not allowed.
 This field will not allow more than 64 charac-
ters.
Secondary SMTP
Server
It lists the Secondary SMTP Server
configuration. It is an optional field. If the Primary
SMTP server is not working fine, then it tries with
Secondary SMTP Server configuration.
Save To save the new SMTP server configuration.
Reset To reset the modified changes.
Table 4-29: SMTP Settings Page (Continued)
I
TEM DESCRIPTION