QUANTA STRATOS S210 Series S210-X22RQ - Removing a LAN Mezzanine Card

INSTALLING HARDWARE REMOVING A LAN MEZZANINE CARD
2-31
8. Secure the module assembly to the chassis with one (1)
screw.
Figure 2-43. Module Screw
Removing a LAN Mezzanine Card
Prerequisite:
Prerequisite:
Remove the top cover.
Remove the PCIe riser assembly. See Removing the
PCIe Expansion Card on page 2-27.
1. Remove one (1) screw securing the module assembly to
the chassis.
Figure 2-44. Module Assembly Screw