THERE IS THE DANGER OF EXPLOSION IF THE BATTERY IS INCOR-
RECTLY REPLACED. WHEN REPLACING THE BATTERY, USE ONLY
THE BATTERY RECOMMENDED BY THE EQUIPMENT MANUFAC-
TURER.
CAREFULLY ROUTE CABLES AS DIRECTED TO MINIMIZE AIRFLOW
BLOCKAGE AND COOLING PROBLEMS. FOR PROPER COOLING AND
AIRFLOW, OPERATE THE SYSTEM ONLY WITH THE CHASSIS COV-
ERS INSTALLED. OPERATING THE SYSTEM WITHOUT THE COVERS
IN PLACE CAN DAMAGE SYSTEM PARTS. TO INSTALL THE COVERS:
Check first to make sure you have not left loose tools or
parts inside the system.
Check that cables, add-in cards, and other components
are properly installed.
Attach the covers to the chassis according to the product
instructions.
!
To Next Page
Loading...