QUANTA STRATOS S210 Series S210-X22RQ - Removing the Pcie Expansion Card

INSTALLING HARDWARE REMOVING THE PCIE EXPANSION CARD
2-27
6. Align the PCIe assembly with the guide pin hole in the
chassis.
7. Insert the PCIe assembly into the PCIe slots on the main-
board.
8. Secure the PCIe assembly to the chassis with one (1)
screw.
Figure 2-35. Installing the PCIe Bracket
Removing the PCIe Expansion Card
1. Remove one (1) screw from the chassis.
Figure 2-36. Removing the PCIe Expansion Card
2. Pull the PCIe bracket out of the chassis.
6
8
7
PCIe Slots
1
2