QUANTA STRATOS S210 Series S210-X22RQ - Page 64

INSTALLING HARDWARE REMOVING THE PCIE EXPANSION CARD
2-28
3. Remove one (1) screw from the PCIe expansion card.
4. Disconnect the PCIe expansion card from the PCIe riser.
Figure 2-37. Installing a PCIe Expansion Card
5. Repeat steps 3 and 4 to remove the additional PCIe
expansion cards.
6. Align the PCIe bracket with the guide pin hole in the chas-
sis.
7. Insert the PCIe bracket into the PCIe slots on the main-
board.
8. Secure the PCIe bracket to the chassis with one (1)
screw.
Figure 2-38. Installing the PCIe Bracket
3
4
PCIe slots
6
7
8