QUANTA STRATOS S210 Series S210-X22RQ - Installing a 2.5 Hard Drive; Installing a 2.5 Hard Drive into a Hard Drive Tray

INSTALLING HARDWARE INSTALLING A 2.5” HARD DRIVE INTO A HARD DRIVE TRAY
2-3
Installing a 2.5” Hard Drive into a
Hard Drive Tray
Figure 2-3. Installing a 2.5” HDD into a Tray
1. Place the hard drive into the hard drive tray.
2. Secure the hard drive with four (4) screws.
Installing a 2.5” Hard Drive
Figure 2-4. Installing a 2.5” HDD Drive
1. Insert the HDD tray into the system. Make sure that the
tray is fully inserted.
2. Close the HDD tray handle.
1
2
WARNING!
Do not force the tray handle closed. If resistance is encoun-
tered check the hard drive is properly inserted and the hard
drives on either side are properly inserted.
1
2
!