QUANTA STRATOS S210 Series S210-X22RQ - Power Supply Unit

INSTALLING HARDWARE POWER SUPPLY UNIT
2-6
2.3 Power Supply Unit
The server models support both single and redundant power
supplies as shown in the following illustrations.
Removing a Power Supply Unit
1. Pull the PSU handle up to the open position.
Figure 2-9. Opening the PSU Handle
CAUTION!
DISCONNECT THE POWER SUPPLY UNIT FROM THE POWER
SOURCE BEFORE REMOVING PSU. FAILURE TO DO SO COULD
RESULT IN DAMAGE TO THE EQUIPMENT OR PERSONAL
INJURY.
Note:
The redundant power supply unit can be replaced without
shutting down the system.