CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-46
To open SNMP Settings page, click Configuration > SNMP
from the main menu. A sample screenshot of SNMP Settings
Page is shown in the screenshot below.
Figure 4-35. SNMP Settings Page
The fields of SNMP Settings Page are explained below.
SOL
Here, you can configure the Serial over LAN settings, select or
change values for each attribute and click the Save button to
save any changes.
Figure 4-36. SOL Settings Page
The fields of SOL Settings Page are explained below.
Table 4-30: SMTP Settings Page
I
TEM DESCRIPTION
Enable SNMPv1/v2 Enable or disable the SNMP feature
Read-Only/Read-
Write Community
String
Set SNMP community string for read-only and
read-write.
Enable Trap Select it to make BMC send SNMP trap
Version Select which trap version to send.
Community String SNMP trap community
Destination IP
The destination IP for trap to send. BMC
provides the 5 destinations.
Table 4-30: SMTP Settings Page (Continued)
I
TEM DESCRIPTION
To Next Page
Loading...
Need help?
General