QUANTA STRATOS S210 Series S210-X22RQ - Installing a Solid State Disk Cage

INSTALLING HARDWARE INSTALLING A SOLID STATE DISK CAGE
2-46
Installing a Solid State Disk Cage
Prerequisite:
Prerequisite:
Remove the SSD cage. See Removing a Solid State Disk
Cage on page 2-45.
1. Align the Solid State Disk (SSD) cage with the chassis
(Figure 2-68).
2. Slide the cage towards the rear of the chassis and align
with the securing screw well.
3. Secure with the single screw.
Figure 2-68. Installing the SSD Cage