RAIL KIT ASSEMBLY INSTALLING THE RACK BRACKETS
6-2
Installing the Inner Rail
Follow these instructions to install inner rail:
1. Slide the release tab to the open position and remove the
inner rail from the rail kit assembly.
Figure 6-1. Disassembling the Rails
2. Align and insert the holes on the inner rail into the pins on
the side of the chassis.
Figure 6-2. Installing the Inner Rail
3. Slide the inner rail until the latch key on the rail locks and
is secure to the chassis.
4. Secure the rail with the single screw.
To Next Page
Loading...