QUANTA STRATOS S210 Series S210-X22RQ - Processors

INSTALLING HARDWARE PROCESSORS
2-14
2.7 Processors
Removing a Processor
Prerequisite:
Prerequisite:
Remove the top cover. See Removing the Top Cover on
page 2-8.
1. Carefully press down and outwards on the right processor
locking lever to release it.
Figure 2-20. Releasing the Right Processor Locking
Lever
WARNING!
The processor remains hot after the system has been pow-
ered down. Allow sufficient time to cool before handling sys-
tem components.
!
CAUTION!
DO NOT TRY TO PULL THE RIGHT-HAND PROCESSOR LOCKING
LEVER FULLY OPEN.