QUANTA STRATOS S210 Series S210-X22RQ - Expansion Cards (Optional)

INSTALLING HARDWARE EXPANSION CARDS (OPTIONAL)
2-26
2.10 Expansion Cards (Optional)
Installing a Riser Assembly
1. Remove one (1) screw from the chassis.
2. Pull the riser assembly out of the chassis.
Figure 2-33. Removing the PCIe Bracket
3. Insert the PCIe expansion card into the PCIe riser.
4. Secure the PCIe expansion card with the single screw.
5. Repeat steps 3 and 4 for the additional PCIe expansion
cards.
Figure 2-34. Installing a PCIe Expansion Card
1
2
3
4